Alaxala AX2500S, Troubleshooting Manual

Page: 30 / 136

1 Overview
4
No. Name Type Description Details
(8) T/R LED:
Green
Ethernet port.
Blinking green: A frame is being transmitted.
(9) 1-24 LED:
Green or
orange Indicates the
operating status of
the
10/100/1000BASE-
T Ethernet port. Lit in green: A link is established.
Blinking green: A link is established and frames are
being sent or received
Lit in orange: Initial state at power-up
Off: Link failure or block when the green ST1 LED is lit
(10) RESET Button
(non-lockin
g) Manual reset button
of the Switch
#1
Restarts the device.
When pressed continuously until all LEDs on the front
panel are lit (3 seconds or more), the Switch is
released from sleep mode.
(11) MODE Button
(non-lockin
g) Not supported
--
#1
The button is behind the front panel. Use a screwdriver with a small head to press the
button.
Figure 1-1 and Table 1-1 describe a typical switch. For details about a specific switch, see
the
Hardware Instruction Manual for the switch.