Alaxala AX2500S, Troubleshooting Manual

Page: 85 / 136

3 Troubleshooting Functional Failures During Operation
59
No. Items to check and commands Action

(Reason: Tunnel-Type Attribute is not
VLAN(13))
Dynamic allocation has failed because the value of the
Tunnel-Type attribute for the RADIUS attribute is not
(13)
.
Set
VLAN(13)
for the
Tunnel-Type
attribute for the
RADIUS
attribute of the RADIUS server.

(Reason: No Tunnel-Medium-Type Attribute)
Dynamic allocation has failed because the
Tunnel-Medium-Type
attribute is not set for the
RADIUS
attribute.
Set the
Tunnel-Medium-Type
attribute for the
RADIUS
attribute of the RADIUS server.

(Reason: Tunnel-Medium-Type Attribute is not
IEEE802(6))
Dynamic allocation has failed because the value of the
Tunnel-Medium-Type
attribute is not
IEEE802(6)
, or
because the value of the
Tunnel-Medium-Type
attribute is
correct but the tag value does not match the tag of the
Tunnel-Type
attribute. Set the correct value or tag for the
Tunnel-Medium-Type attribute for the RADIUS attribute of
the RADIUS server.

(Reason: Invalid Tunnel-Private-Group-ID
Attribute)
Dynamic allocation has failed because an invalid value is set
for the
Tunnel-Private-Group-ID
attribute for the
RADIUS
attribute.
Set the correct VLAN ID for the
Tunnel-Private-Group-ID
attribute for the
RADIUS
attribute of the RADIUS server.
If a VLAN name has been registered on the RADIUS server,
make sure the target VLAN name matches the VLAN name
specified in the
name
#2
configuration command.

(Reason: The port doesn't belong to VLAN)
Dynamic allocation has failed because the authentication
port does not belong to the VLAN ID specified for the
Tunnel-Private-Group-ID
attribute for the
RADIUS
attribute.
Correct the configuration so that the VLAN ID specified for
the
Tunnel-Private-Group-ID
attribute of the
RADIUS
attributes for the RADIUS server matches the VLAN ID of the
authenticating port
#1
.
If a VLAN name has been registered on the RADIUS server,
make sure the target VLAN name matches the VLAN name
specified in the
name
#2
configuration command.

If none of the above applies, see the RADIUS server log to
check whether authentication has failed.