Alarm Lock Trilogy DL4100 Series, Programming Instructions Manual, Page: 15 / 40

r
Programming Functions
USERS
1. New Master Code
(User Number
1
) I ^ Q 1 ^ 3 I ^ Q [ _________ ]
(New Master Code)
---------------------------------------------------------------------------------------------------------------------
• Master Code must be
6
digits-only. M
• Master Code is Keypad Code Access only.
• Factory Default = II C P lll^ 3 I I ^ Q ll^ O I I ^ P ll^ O
• See "Lock Design Overview" on page 5 for more information about Master Codes.
2. Add/Delete/Change User Codes 2-2000 [____ ] *
(User Number)
• User Number must be between 2 and 2000. 3
• To delete a code/card, leave the User Code blank and wait for the rapid beeping to stop.
• User Code must be 3-6 digits.
• Each User Code can be thought of as a person. As long as each person possesses their own
unique User Code, you can control access to the lock by adding or deleting User Codes. See
"Terminology Used in this Manual" on page
6
for more information.
Lock Defaults for the DL4100 and DL4500
See page
8
. Users added will default to a Group Association and a Program Level Ability as follows:
USER TYPE USER NUMBER GROUP DEFAULT MINIMUM PROGRAM
Master
1
-
M (All Programming Abilities)
Installers 2 & 3 none
4 (Also 3, 2, 1)
Managers 4 -
6
none
3 (Also 2, 1)
Supervisors 7 - 9 none
2 (Also 1)
Print Only Users
10
-
1 1
none
1
Basic Users 12 - 50 none none
Basic Users in Group 1 51 - 100
1
none
Basic Users in Group 2 101 - 150
2
none
Basic Users in Group 3 151 - 200 3 none
Basic Users in Group 4 201 - 250 4 none
Basic Users 251 - 296 none none
Q uick Enable User 300 297 none none
Q uick PC Access 298 none none
AL-DTM 2 Code 299 none none
Service User 300 none none
Basic Users 301-2000 none none
User 299 is a Non-Pass Code. This is the only code that will initiate data transfer with the AL-DTM.
ii
^
d i
[ _________ ] l i e :
(Confirm New Master Code)
ir a ^ i [ _________ ] l i e :
(User Code)
15