Number of Flashes
Error and Solution
5
Radio portion of the module is not working correctly. If
this persists for more than a few minutes the module may
need to be replaced. This error is extremely rare so verify
that the module is flashing
five times.
6
This is an error only if it persists for more than a minute.
Otherwise, it’s an indication that the module is fixing an
unusual condition regarding communication with the LTE
network.
7
Access Code Lock On: This option must be turned off at
the panel (System Programming - 0003) for module to
communicate.
8
If it persists, the account may have been set up
incorrectly. Contact Alarm.com Technical Support. You
will be asked to check the serial number of the module.
LED L2 (yellow)
L2 flashes with every communication between the module and the panel. Normal pattern calls for a series of quick
flashes every two seconds in Idle Mode or four seconds in PowerSave Mode. It also occasionally flashes in patterns to
indicate Z-Wave status.
The following table shows a description of various possibilities:
Updated: Wed, 04 Mar 2020 15:12:44 GMT
13
