7
1.2 Product Conformity
ALARKO CARR
İ
ER declares that all its products are manufactured to a high speci
fi
cation and in compliance
with the relevant standards.
ALARKO boilers are CE certi
fi
ed and possess technical and functional characteristics that comply with the
following standards:
UNI EN 297 for GAS-FIRED CENTRAL HEATING BOILERS TYPE B OF NOMINAL HEAT INPUT
≤
70 kW
EN 483 for GAS-FIRED CENTRAL HEATING BOILERS TYPE C OF NOMINAL HEAT INPUT
≤
70 kW
UNI EN 677 for GAS-FIRED CENTRAL HEATING BOILERS. SPECIFIC REQUIREMENTS FOR CONDENS-
ING BOILERS WITH NOMINAL HEAT INPUT
≤
70 kW
Gas
fi
red boilers also comply with the following directives:
GAS APPLIANCES DIRECTIVE 90/396 CEE for CE compliance
BOILER EFFICIENCY DIRECTIVE 92/42 CEE
The materials used such as copper, brass, stainless steel, etc. form a compact, homogeneous, highly func-
tional unit that is easy to install and simple to operate. In its simplicity, the wall-mounted appliance is equipped
with all the appropriate accessories required to make it a fully independent boiler capable of satisfying do-
mestic hot water production and central heating needs. All boilers are fully inspected and are accompanied by
a quality certi
fi
cate, signed by the inspector, and a guarantee certi
fi
cate. This manual must be kept in a safe
place and must accompany the boiler at all times.
ALARKO CARR
İ
ER will not be held responsible for any misinterpretation of this manual resulting
from the inaccurate translation of same.
ALARKO CARR
İ
ER will not be held responsible for the consequences in the case of nonobservance
of the instructions contained in this manual or in the case where actions not speci
fi
cally described
herein are undertaken.
ALARKO CARR
İ
ER declare that no substances harmful to health are contained in the appliance or
used during appliance manufacture and have not used or intend to use any of the following sub-
stances in the manufacture of ALARKO heating products.
- Asbestos
- Mercury
- CFC’s.
1.3 Gas Safety
It is the law that all gas appliances must be installed by a competent person in accordance with the current
rules and regulations in force in the country of destination. With the same scope, any gas conversion process
carried out on the boiler must be done by a competent person as well.
These appliances are certi
fi
ed to be used at natural gas, propan gas and butane gas with prescribed gas inlet
pressures given in Table-1. No other gas use condition is allowed for the boiler.
The particular gas type that the boiler is already adjusted to is written on its data badge, unless it is converted
to another gas by a competent person. Make sure that the boiler is not used with a different gas, other than
which it is adjusted for or it is
fi
nally converted to.
