Alarko ADK 200, Operation Manual

Page: 10 / 38

8
•
ADK 200 boilers are delivered without burners. For suitable burner
selection please get in touch with Alarko Carrier technicians. Suitable
burners must be selected for taking high efficiency.
•
If the boiler is stopped automatically because of over heating do not add
cold water to the boiler for restarting. In this case wait for the boiler to
cool down and re-try starting. If it does not start please get in contact
with technical services.
•
In cleaning, repair and other care operations the original spare parts which
approved and manufactured by Alarko Carrier must be used.
•
The periodical and yearly controls of the boiler must be done properly
and on time. Natural gas is a clean fuel and doesn’t make a lot of dirt in
the boiler. But the boilers that liquid fuels are used as fuels are much
more easily get dirt. Controls and care operations of the boiler is needed
for keeping high efficiency and long life of the boiler.
•
Repairing and periodical controls of ADK 200 boilers require profession.
In this manual the responsibilities and required information for users of
the boiler is declared. Besides these declared operations, boiler must
not be started by a person rather than the user or one our technicians.
Please do not try to make adjustment or do not touch any parts of the
boilers.
•
The electric of the burner and the boiler is supplied by city electric network.
In this case the elecric and lighting systems of the boiler room, burner
and boiler electrical connections, grounding line of control panel and
boiler must be made by professionals under the required and related
standards.
•
In this manual you will find informations only for the boilers. Please do
not forget to get the instruction manual of the burner that you purchase
from the manufacturer of it. Burner is not delivered with the boiler. In this
case we do not give any guarantee for the burner that you purchase.
Please get the quarantee certificate for the burner from your supplier.
•
Please be sure that the front door (burner door) for the boiler is strictly
closed and burner connections are properly made as the boiler is working.