Alarko ADK 200, Operation Manual

Page: 29 / 38

27
CAUTION:
Switch off the boiler immediately if there is danger of burning or explosion
(elecricity problem, gas leakage, liquid gas and liquid fuel leakage etc.).
Positioning The Boiler:
Alarko Carrier boilers must be positioned and placed in the terms of fine protection
laws with caution. When installing and operating the boilers it is necessary to
keep a safe 200 mm distance from combustible materials with combustibility
degrees B,C1,C2. For easily flammable materials with combustibility degree C3,
which burn quickly and by themselves also after the ignition source removal the
safe distance is doubled it means 400 mm. The safe distance is to be doubled
also in case that the combustibility degree of building material wasn’t proved.
•
In LPG or liquid fuel use; boiler room, flue, system and plumbing issues
must be under parameters of EN standards and gas offices orders. Alarko
Carrier is not responsible for any failure or problems that will be occurred
because of inadequate or not sufficiently qualified conditions of boiler room,
plumbing and other systems.
•
The instructions of local gas delivery must be applied.
•
Before painting keep flammable materials out.
•
Before any welding operation in boiler room, boiler must be stopped
and the gas flow must be stopped by turning of the gas valve.
•
Do not touch the boiler when it is hot.
•
Boiler must not be installed on carpet.