31
Orientation
- set the digital stamp at this angle.
Border
On
- check, to put a rectangular line around the perimeter of your stamp.
Color
- use
Select
button to choose border color.
Thickness
- how heavy a line to use for the border.
Opacity
- 0% makes the digital stamp completely transparent; 100% makes it
completely opaque (any image data behind the stamp will not be visible).
Multifeed Detection tab
Multifeed detection aids in document processing by detecting documents that
may go through the feeder overlapped. Multifeed can happen due to stapled
documents, adhesives on documents or electrostatically charged documents.
The Multifeed Detection tab provides the following options:
Length Detection
— when you enable
Length Detection
you can select the
maximum length of the document that can be scanned without a multifeed being
detected. Length detection is used when scanning same-sized documents to
check for overlap. For example, if you are scanning A4 (8.5 x 11-inch)
documents in portrait mode, enter a value of 28.57 cm (11.25 inches) in the
Max
Length
field. The maximum value is 35.56 cm (13.99 inches).
Action: select what action you want the scanner to take when a multifeed
is detected. With all options, the condition will be logged in the scanner.
Continue Scanning
: the scanner will continue to scan. Image(s) of the
multi-fed document will be generated.
Stop Scanning
: scanning will stop and control will return to the
scanning application (i.e,. ends the job). Image(s) of the multi-fed
document will not be generated. Verify that the paper path has been
cleared and restart the scan session from the scanning application.
Stop Scanning - generate image(s)
: scanning will stop and control
will return to the scanning application (i.e., ends the job). Image(s) of
the multi-fed document will be generated. Verify that the paper path
has been cleared and restart the scan session from the scanning
application.
