19
Image Edge Fill tab
This option fills the edges of the final electronic image by covering the area with
the specified color. Image Edge Fill is performed after all other image processing
options have been applied.
Fill Color
— allows you to select the color to fill the edges with.
None
White
Black
Automatic: the scanner will automatically fill the edges of the image using
the surrounding color.
Automatic - include Tears: in addition to filling the edges, the scanner will
also fill in tears along the edge of document.
When you select
White
or
Black
these options are available:
If you check Frame Mode, an equal amount of the selected color from the
Image Edge Fill
drop-down list will be filled in all on all sides of the image.
If you do not check
Frame
Mode
, you can select a value in the
Top
,
Left
,
Right
and/or
Bottom
area(s) from each side of the scanned image to be
filled.
When using Image Edge Fill, be careful not to enter a value too large as it could
fill in image data that you want to keep.
Blank Image Detection tab
Blank Image Detection allows you to configure the scanner to not give blank
images to the scanning application. Select the image size (KB), below which an
image is determined to be blank. Images with sizes less than the number you
select will not be created. If you use this option, you must specify a blank image
size for each image type (
Black and White, Grayscale
and
Color
) you want to
delete. If you do not make an entry in these fields, all images are kept.
Mode
Off: all images are given to the scanning application.
Size: images will be considered blank based on the size of the image that
would be given to the scanning application (i.e., after all other settings
have been applied).
