25
NOTES:
Changing this value will affect the maximums for the following
settings:
Layout - Page Size
;
Multifeed - Length Detection
.
Not all combinations of settings for
Image Mode
and
Dots per inch
are supported at the larger lengths. To allow for greater flexibility
with applications, the scanner will not generate an error until it sees
a document whose length is not supported.
The scanner's throughput may be reduced for large lengths.
Intelligent Document Protection
- allows you to select how aggressively the
scanner detects documents that enter the scanner incorrectly. This can occur
when documents are not prepared properly for scanning (e.g. stapled or paper
clipped documents).
(none)
Normal
: This is the recommended option as it provides a balance
between minimizing document damage and stopping the scanner
unnecessarily.
Minimum
: Select this option if the scanner is stopping too frequently on
documents that you do not want it to detect.
NOTE: Documents may become more damaged before detection occurs.
Maximum
: Select this option to get the least amount of document
damage.
NOTE: This may cause the scanner to stop unnecessarily.
Action when paper jam occurs
- allows you to select what happens when the
scanner detects a paper jam.
Stop Scanning
- scanning will stop and control will return to the scanning
application (i.e. ends the job). Verify that the paper path has been cleared
and restart the scan session from the scanning application.
Pause Scanning
- scanning will stop but the scanning application will be
waiting for additional images (i.e. stops the feeder). Clear the paper path,
then scanning may be resumed by pressing the
Start
button on the
scanner. Scanning may be stopped by pressing the
Stop
button on the
scanner or via the scanning application.
Sleeved and Split Documents
Document Feeder
