24
Power Off
— allows you to set the amount of time, in minutes, the scanner has
to be in power saver mode before it automatically turns off.
Power Saver
— allows you to set the amount of time the scanner (
1
to
240
minutes) will remain inactive before the scanner goes into an idle state. The
default is 15 minutes.
Transport tab
Active Feed
- May be useful to help straighten paper before feeding,
especially fairly smooth paper of mixed sizes. Paper should be at least 4-5
inches (12 cm) wide and centered in the input tray. Input stack should be no
taller than 1/8 inch (3 mm), e.g. 30 pages of 20 pound paper.
None
: Default: recommended for lightweight or delicate paper, and when
pages are straightened by hand before being placed in the input tray.
Gentle
: Light jogging of the pages in the input tray, before feeding begins.
May be useful for 7 pound paper or heavier.
Normal
: Jogging of the pages in the input tray, before feeding begins.
May be useful for 13 pound paper or heavier.
Enhanced Separation
- Helps avoid multifeeds at start of scanning. If you are
feeding hard cards or paper that separates easily, enhanced separation may not
be helpful.
Enhanced Separation:
slows feeding of the initial page in the input tray,
to avoid multifeeding.
Handling
- allows you to select how the scanner transports documents
through the scanner. This affects how the documents are fed into the scanner,
how fast they move through the scanner, and how they are placed in the
output tray.
Normal
: No additional handling is performed. Best used when all
documents are similar in size.
Improved Stacking
: Aids in controlling how the documents are
stacked/ordered in the output tray for mixed document sets. This should
work for the majority of mixed sets.
Best Stacking
: When your document set contains a great variability in
size, this option provides the best control of how the documents are
stacked/ordered within the output tray.
Document Length
Longest
- select a value that indicates the length of the longest document
in your document set.
For S2000 series scanners you can configure the following power settings. For
S2000w series scanners, configure power settings on the scanner touch screen
or embedded web site.
