29
Define the text part of your digital stamp by choosing one or more elements. You
can add the same element more than once, for instance if you want your text to
have more than one
Space
in it - except that only one
Message
element is
allowed per line.
Line length must be 40 characters or less.
Select from these elements for this line of your digital stamp:
Message
- type in any static text, such as "Date" or "Page."
Date
- choose a date format to be added and a separator (e.g.
YYYYMMDD with hyphen separator: 2017-04-28); or choose to enter a
specific date.
Time
- choose a time format to be added; or choose to enter a specific
time.
Space
- add spaces, to make the line easier to read.
Counter
- this value increments for each page scanned. If you add a
Counter, define it with these options:
Starting value
: sets the number for the next sheet of paper that will
be scanned.
Field width
: configures the width of the counter from 1 - 9.
However, if for example, you only have 6 characters left in this line
of the digital stamp, then the field width would be limited to 6.
Leading zeroes
: configures the format of the counter when the
width of the value is less than the field width (the examples indicate
a field width of 3 and the counter at 4).
Display
: "004"
Do Not Display
: "4"
Display As Spaces
: " 4"
Increment
: when the counter will count up.
Reset
: when the counter changes to the
Reset Value
.
Reset Value
: new value when the counter reaches the
Reset
event
selected above.
Up
and
Down
arrows
Use the arrows to re-order elements within this line (as shown in the
Example
).
