Quick reference
Operation resume
Should you are now familiar with your transceiver you do know now
that it’s very easy to use one of its menu command, you just have to
do what follows:
1) Press repeatedly the MENU key until the required setting appears
on the LCD.
2) Now you can do one of the following actions:
•
If the related message is followed by
Ok
, press the
key to
enter the setting.
•
If two arrows are present in each side of the LCD, press either
or
respectively to decrease or increase the setting.
•
If two parameters appears in each side of the LCD, press either
or
respectively to activate the left or right parameter.
3) If necessary do what is described for that particular setting (e.g.
hold pressed the
-call- button in case of DTMF sending).
4) To exit from the menu command hold pressed the
(clear) key.
26
Quick reference
English