Selcall and CTCSS/DCS Operation Reception
19
After the call from Mike
(ID 08)
1
st
Mike
08
2
nd
John
01
3
rd
Robert
05
4
th
Mary
07
5
th
Headoffice
15
6
th
Lyndsay
21
7
th
Branch
33
8
th
William
55
9
th
Ann
16
10
th
Peter
19
2
If you need to delete an address stored in the call queue without
calling it perform the over stated procedure. At the step 4 press
the
(clear) button: the selected address will be deleted.
2
The call queue is provided with a “space save” function: if more
than one call has been received from the same caller, this avoids
that his/her address is stored twice. The oldest position will
automatically be deleted and the new one will be kept. For example
this is what will happen when a new call is received from a user
who has already been stored in the call queue (Mike with ID 08):
Before the call from Mike
(ID 08)
1
st
John
01
2
nd
Robert
05
3
rd
Mary
07
4
th
Headoffice
15
5
th
Lyndsay
21
6
th
Mike
08
7
th
Branch
33
8
th
William
55
9
th
Ann
16
10
th
Peter
19
Manual call
If the radio network administrator or your dealer has enabled in your
unit the manual definition of variable address digits:
1) Just dial the variable address digits using the keypad before
sending the call. Any digit can be corrected by overwriting.
2) After you see the right address on the display make the call by
pressing the
(call) button.
2
To repeat the last call, just press the
button twice. The group
tone (‘A’) can be obtained by pressing and holding the 0 key.
One touch call
Just press either the CALL1 or CALL2 button. If they have been
programmed the preset addresses will be automatically called.
English