Optional accessories
25
•
The suggested speaker input impedance is 8 Ohms
•
The
microphone should be condenser low-impedance type.
•
Any accessory should be hi-quality suitable for professional use.
I
Please don’t connect any accessory which you are not sure
meet the above stated requirements. You could create serious
damages to your radio. In case of doubt please contact your
authorized dealer.
English
Optional accessories
These optional accessories can be used to improve the transceiver’s
performances:
•
Spare battery pack. It extends the duty time and minimizes the
possibility of memory effect (please see “Memory effect”).
•
Rapid charger. It recharges the battery packs in 1 hour and provides
trickle charge when they reached their full charge.
•
Carrying case. It protects your radio against small shocks and
scratches; the best for use in hard environments.
Microphone connector
The microphone connector is designed for the connection of two
basic accessories (not supplied as standard):
•
An external speaker/microphone, which allows to use the radio
firmly secured to your belt by means of the supplied belt clip.
•
An headset with built-in microphone, which additionally add the
VOX facility, in other words you can switch the transmission just
by talking at the headset’s microphone in hands free convenience.
For further details please see “Hands free transmission (VOX)”.
Any kind of accessory for the above stated purposes can be connected
to the microphone connector, provided that they meet the following
requirements:
•
Jack connectors for Speaker (SPK) and Microphone (MIC) must
be respectively standard type 3,5 mm and 2,5 mm. and connected
as follows:
Mic GND
MIC
SPK
Spk GND