10
Basic Operations
Basic Operations
This section describes how the standard operations work. Standard
operation can be changed by programming, moreover the functions
the radio includes can be modified via an IBM compatible PC. For
this reason the way your radio operates may be upgraded and may
slightly differ from what is described here.
2
IMPORTANT: Due to the full programmability of the radio, certain
menu commands could be unavailable. E.g. if your radio hasn’t
been programmed for selective call operations, the related menu
commands won’t be recalled. In case of doubts please contact
your dealer/radio network administrator for further details.
1) Connect the jack coming from the AC adaptor to the cradle’s
socket located in its right side.
2) Connect the AC plug of the AC adaptor’s power cable into an
earthed AC power outlet: the built-in green LED of the cradle will
glow.
3) Ensure that the radio is switched off, otherwise switch it off by
holding the
(power) key pressed (release it after the radio is
switched off).
4) Insert the radio into the cradle with the keypad toward you (the
three metallic contacts of the battery pack must touch with the
three contacts inside the cradle): the built-in red LED of the cradle
will glow.
5) Wait 8-9 hours and remove the radio after that time.
2
Don’t remove the radio before 8 hours, otherwise the battery’s
duty could be temporarily reduced.
I
Don’t forget to remove the radio after 9 hours.
I
The battery charger is for indoor use only.
I
For the next charges, best duty and battery life please fully
see the chapter “Battery Packs”.
English