Alacritech 100 Series User’s Guide - Rev 4
5-3
5.5 Event Log Errors
This section covers entries written to the Event Log. You can view
the Event Log from the Event Viewer located in the Administrative
Tools folder on the Start Menu, located under Programs.
Problem
Solution
Event Log reports
"SLIC<x> Has
determined that the
adapter is not
functioning properly"
Run Diagnostics from NCPA. See the
procedure in Chapter 4.
Contact Alacritech technical support
for assistance. This is probably the
result of a malfunctioning adapter.
Event Log reports
"SLIC<x>: Could not
find an adapter"
On Windows NT machines, network
cards must remain in the same slot
where they were installed. Check that
the card has not been moved to
another slot. If it has, then either:
Move it back to its original slot, or
De-install the appropriate 100
Series adapters from the adapters
tab of the NCPA, reboot, and then
reinstall.
Note: If a peripheral card with a bridge chip was
installed on your system, the bus numbering may
have been changed and the system will not be
able to locate your 100 Series adapter. In this
case, de-install the 100 Series adapter(s) and then
re-install.
