4-8
Alacritech 100 Series User’s Guide - Rev 4
4.2 Running Adapter Diagnostics
Diagnostics can be run on the 100 Series adapter using the
following procedure:
1.
Open the Control Panel.
2.
In the
Network
dialog box, select the
Adapters
tab.
3.
Select one of the 100 Series adapters.
4.
Click the
Properties
button.
5.
Select the
Diagnostics
tab.
Note: Running Diagnostics will disrupt all ports of the
100 Series adapter.
6.
Click the
Run
button. The adapter will then run through
self test of the IPP and all ports of the adapter. A
properly functioning board should display the following
results:
7.
Close the Network Control Panel by clicking the
OK
button.