3-6
Alacritech 100 Series User’s Guide - Rev 4
10.
After networking files are copied off of the NT
installation CD, the system will prompt you to "insert
the disk labeled: 100 Series Driver Installation CD." Do
so at that point.
11.
Continue with the remainder of the installation, and
after the networking portion of the installation is
complete, replace the 100 Series Driver Installation CD
with the NT Installation CD.
3.2.4 Updating the 100 Series Drivers
The 100 Series driver set can be updated using the
following procedure:
1.
Open the Control Panel.
2.
In the
Network
dialog box, select the
Adapters
tab.
3.
Select one of the 100 Series adapters.
4.
Select
Update
.
5.
Insert the Alacritech 100 Series Driver Installation CD
into your CD-ROM drive and Specify the drive letter
corresponding to your CD-ROM drive in the
Setup
window.
6.
Close the Network Control Panel applet and restart your
computer.