3-4
Alacritech 100 Series User’s Guide - Rev 4
4.
Insert the 100 Series Driver Installation CD into your
CD-ROM drive.
5.
In the
Insert Disk
dialog box, enter D:\ (or the
appropriate drive) and click the
OK
button.
6.
In the
Select OEM Option
dialog box, select
Alacritech 100 Series Adapter and click the
OK
button.
7.
In the
NT Setup
window, click on
Next
.
8.
In the
Network Protocols
window, select the
appropriate protocols. Note that in order to realize the
benefit of the SLIC TCPIP Offload, TCP/IP must be
installed on the system.
9.
In the
Network Services
window, select the appropriate
services for your system.
10.
When
Windows NT Setup
specifies that it "needs to
copy some Windows NT files", replace the 100 Series
Driver Installation CD with the NT installation CD,
specify the drive letter corresponding to your CD-ROM
and click on
Continue
.
11.
A Setup Message will appear next asking you to "insert
the disk labeled: 100 Series Driver Installation CD." Do
so and click on
OK
.
12.
IMPORTANT!
- When the
TCP/IP Setup
window
appears, asking if you wish to use DHCP, replace the
100 Series Driver Installation CD with the NT
installation CD. Then respond by selecting
Yes
or
No
,
depending on your network’s requirements.
13.
After all of the networking files are copied, you will
once again be prompted to "insert the disk labeled: 100
Series Driver installation CD." Do so and click on
OK
.
14.
Continue with the installation as instructed.
