5-2
Alacritech 100 Series User’s Guide - Rev 4
5.4 Installation Problems
This section covers errors and problems surrounding installation
only. For other problems, please see the other sections in this
chapter.
Problem
Solution
Error message:
"Setup
cannot find
OEMSETUP.INF or
OEMSETNT.INF"
Make sure that you are attempting to
install from the Adapters tab of the
Network Control Panel Applet
(NCPA).
Ensure that you are specifying the
proper drive letter for your CD-ROM
drive.
Error message:
“No
SLIC adapters found”
Make sure that the 100 Series adapter
has been correctly installed in a PCI
slot and that the PCI slot is enabled
(some PCI hot-plug capable systems
will not enable PCI slots unless the
slot fastener is secured).
