457290_b
59
Maintenance and care
"
Blades service
"
Shows in how many operating hours a blade ser-
vice is required. The counter can be reset manu-
ally. Have the blade service carried out by an AL-
KO dealer, technician or service partner.
Reset the counter for blade service:
1.
"
Confirm
"
"
Hardware
"
Shows information on the appliance, such as
type, year of manufacture, operating hours, serial
identification number, number of mowing inserts,
total mowing time, number of charging cycles, to-
tal charging time, length of the loop of the bound-
ary cable.
"
Software
"
Shows the firmware version.
"
Program Info
"
Shows current settings such as the total weekly
mowing time.
"
Failures
"
Shows the fault messages that last occurred with
date, time and fault code.
9
MAINTENANCE AND CARE
CAUTION!
Risk of injury
Sharp-edged and moving
appliance parts can lead to
injury.
■
Always wear protective
gloves during mainte-
nance, care and clean-
ing work.
9.1
Cleaning
IMPORTANT!
Danger from water
Water in the automatic
lawn mower and in the
base station leads to dam-
age on electrical compo-
nents.
■
Do not spray the auto-
matic lawn mower and
base station with water.
Clean the automatic lawn mower
CAUTION!
Danger of injury due to
the cutting blade
The cutting blades are
very sharp and can cause
cutting injuries.
■
Wear protective gloves.
■
Make sure that parts of
the body do not get into
the cutting blade.
Once a week, carry out the following:
1.
Switching off the appliance.
2. Wipe off the surface of the housing with a
broom, a brush, a damp cloth or a fine
sponge.
3. Brush off the underside, mower deck and cut-
ting blade with a brush.
4. Check the cutting blade for damage. If neces-
sary, replace the following: see
chapter 9.3
"Replacing the cutting blades", page 60
.
Cleaning the base station
1. Regularly remove grass residues and leaves
or other objects out of the base station.
2. Wipe off the surface of the base station with
a damp cloth or a fine sponge.
