AL-KO Robolinho 1150, Manual

Page: 79 / 652

442811_a 79
Check the power source of the base
station. Disconnect and reconnect
the power supply.
Raise the boundary cable to the
prescribed height; attach directly on
the grass if necessary.
position
Place the appliance on the free,
designated grass surface.
Correct the location of the boundary
cable around curves and obstacles.
Eliminate the criss-crossing of the
cable.
Correct the location of the boundary
cable around curves and obstacles.
CN015: Cal:
outside
find the boundary cable.
■
Check the LEDs on the base station.
■
Check the power source of the base
station. Disconnect and reconnect
the power supply.
■
Place the appliance at the
prescribed calibrating position; align
precisely at right angles. Appliance
must be able to drive over the
boundary cable.
■
No loop signal
■
The boundary cable is
faulty.
■
Place the appliance at the
prescribed calibrating position; align
precisely at right angles.
■
Check the power source of the base
station. Disconnect and reconnect
the power supply.
■
Check the boundary cable for
damage.
Remove the obstacle.
Help in case of malfunction
Fault code Cause Remedy
CN038: Battery The rechargeable battery is
flat:
Loop of the boundary cable
is too long, too many
islands. Correct the location of the boundary
cable.