Translation of original operating instructions
32
AL-KO EASYAIR
®
flat
3
5
4
4
3
5
Fig. 20 Remove door rib
3
Tooth disc
5
Covering cap
4
DUO-Taptite M5x10
Droplet eliminator (cooling module)
Open or fit the maintenance panel, see “5.4 Opening/removing the maintenance panel” on page 23
.
The droplet eliminator can be carefully removed from the housing by pushing it up and moving it to the side in the
direction of the heat exchanger by releasing it.
5.5.3
Duct connection
With GF units, the duct system of the ventilation directs the outdoor air to the air handling unit and as supply air into the
building. The extract air is passed through the unit and to the outside as exhaust air for heat recovery.
With EF units, the duct system directs the outdoor or room air to the air handling unit and as supply air into the building/
room or as exhaust air out of the building.
Duct connection fitting
For all EASYAIR
®
flat air handling units, you will receive sound-decoupled connectors that use the entire free device
cross-section. EASYAIR
®
flat connection fittings are supplied loose.
The connection of the ventilation ducts to the unit must be carried out professionally.
The duct connection must be distortion-free and free of load on the EASYAIR
®
flat air handling unit.
Establish equipotential bonding on the duct.
