ENGLISH - 24
Put the cable inside the cable holder as above picture
21
Get controller cable and signal cables, cable holder and gland for installation
Place the assemble cable holder inside the tape
markings. Drill three(3) 2mm holes
Fix cable holder on the vehicle roof with
three(3) of M4 x 20 screws at drill holes made
23
22
Apply silicone around cable holder and on the
top of the screws for waterproof
Connect cables to fassigned and remove
masking tape then tidy silicone before dry
25
24
20
Summary of Contents for EASISAT 4.0
Page 27: ......