background image

ENGLISH - 2


Please also note the following instructions from the manufacturer : 

1. General Information

1-1. Introduction

These instructions describe the functions and operation of the EASISAT 4.0/4.5 satellite 
system.
Correct and safe operation of the system can only be ensured by following these 
instructions.

Your EASISAT 4.0/4.5 is an intelligent satellite TV reception antenna system which can 
align itself towards a preset satellite automatically as long as the system is located 
within the footprint of the selected satellite.

For general operation, please ensure that the system always has a clear view to the sky. 
If the satellite‘s signal beam is interrupted by obstacles such as mountains, buildings or 

1-2. Proper use and operation

This product has been designed for fixed installation on vehicles with maximum speeds 
of 130 km/h. It is designed to automatically aim an antenna at geostationary television 
satellites. The power to the system is supplied by a standard vehicle electrical system 
with a rated voltage of 12 Volts DC.

Use of the equipment for any other purpose to the one specified is not permitted.

It is not permitted to change the overall device by removing or adding individual 

components. The use of any other parabolic reflectors or LNBs to those originally 

installed is not allowed.

Installation must only be performed by sufficiently qualified personnel. All instructions in 

the supplied Installation instructions, which is separately provided, must be carefully 

followed.

The product does not require any regular maintenance. Housings and enclosures must not 

be opened. Check and maintenance work should always be carried out by a qualified 

specialist.

All of the relevant and approved guidelines of the automotive industry must be observed 

and complied with.

The equipment must only be installed on hard vehicle roofs.

Avoid cleaning your vehicle with the mounted satellite system in a single-bay or drive-

through car wash or with a high-pressure cleaner.

In case of storm or strong winds, bring the antenna down.

Summary of Contents for EASISAT 4.0




























Reviews: