ENGLISH - 14
6-2. Searching the satellite
For example :
a.
b.
Go to the target satellite using arrow buttons and press SET to search
Lock LED blinks during searching process and becomes solid when the target satellite is
locked
c.
d.
If wrong satellite is selected, move to the correct satellite and press SET to confirm the
new satellite
After use or before travelling, press HOME for HOME positioning
The default setting for DiSEqC is ON, DiSEqC LED is on.
To switch the function ON/OFF, make sure that antenna is at HOME and press DiSEqC button
for 2 seconds. (See also DiSEqC LED status changes between ON and OFF.)
For DiSEqC operating of the antenna, STB has to have matching satellite list as EASISAT
4.0/4.5’s pre-set list. User needs to assign satellites in same order (#1~12 in the above table)
at STB’s DiSEqC setting to be ready for DiSEqC function use.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
LNB 1
LNB 2
LNB 3
LNB 4
LNB 5
LNB 6
LNB 7
LNB 8
LNB 9
LNB 10
LNB 11
LNB 12
LNB 13
LNB 14
LNB 15
LNB 16
Turksat
Astra 2
Astra 3
Astra 1
Hotbird
Eutelsat 9
Astra 4
Thor
Eutelsat 5W
Hispasat
User 1
User 2
x
x
Search Current Satellite
Go to HOME position
NO
LNB
Satellite
6-3. DiSEqC 1.1 setting
Refer EASISAT 4.0/4.5’s pre-set satellites for DiSEqC 1.1. when user setup at STB
a.
b.
Summary of Contents for EASISAT 4.0
Page 27: ......
