![background image](http://html.mh-extra.com/html/akura/saorview-avt8010/saorview-avt8010_user-manual_2887240012.webp)
11
33
Main Menu .
The Main Menu is accessed by pressing the MENU
button. The items accessed can be seen below.
Moving the Channels in the Channel list
Re ordering the list can be done by entering the “MOVE”
function using the
►
/
◄
buttons.
Navigate the list using the
▲
/
▼
buttons and to select the
channel and press OK. Enter the New Channel number
where you want to move the channel to and press OK. The
channel will then move to the new location.
RTE transmits a code in each channel to identify the channel
details. The STB detects this and places the channels in the
correct order.
If you wish to move any channel, you may re number from 1
- 999
1.
Channel list.
2.
Programme guide.
3.
Timers
4.
Recording Timers
5.
Recordings Library
6.
Setup
7.
Media Browser.
Channel List.
The following operations
can be performed in this
menu.
Navigating the list of channels
Moving channels
Deleted unwanted channels
Renaming channels
Adding locks to channels
Setting a “Favourites” list.
The CHANNEL Table is where the channels are
managed
Channel List Navigation.
In the channel table use the
▲
/
▼
buttons to select
the channel required, and use the Red/Green
buttons to select Page Up/Down.
Press OK to view the channel highlighted. The
name and channel number will be displayed in the
preview window.
If the selected channel is password protected a
message will be displayed. If you enter the correct
password the channel will be shown.
Deleting a Channels in the Channel list
To Delete a channel, use the
▲
/
▼
buttons to select the
required channel, highlight “DELETE” using the
►
/
◄
buttons
and press OK. You will be asked to select “YES” or “NO”. If
you select NO the operation will be halted.
Note: When a
channel is deleted you must perform a Retune to re install
that channel.
Renaming Channels.
To Rename a specific channel, the Channel must be
highlighted and then select “EDIT NAME”. Press OK to see
the Edit Name OSD box.
The first character will be highlighted. To change the letter
use the “alpha/Numeric” buttons, each press will scroll
through a number of options until you see the one you
require. To move to the next letter use the
►
/
◄
buttons.
Press OK when completed. Press Menu to exit before or at
the end of the operation.
Channel Lock
Channel locking provides a password-protected access to
channels selected by adults. To set the Lock, select the
channel you require to lock useing the
▲
/
▼
buttons . Select
“LOCK” using the
►
/
◄
buttons and press OK. You will need
to enter your password “0000” factory default.
Press OK and a Lock sign will be shown adjacent to the
Channel name. To remove the lock, press OK again.
If you wish to view the “Locked” channel you will need to
enter the Password.
7. Menu System
Summary of Contents for SaorView AVT8010
Page 6: ...5 3 3 5 Remote Control ...