16
33
Maturity Lock cont..
If the programme has a recommended level over
the “set level” the programme will not be shown.
Menu Lock.
You may select the Menu system you wish to lock.
This stops un authorised settings of the STB being
changed.
Select from :- all Menu’s, Installation Menu, and
Disabled.
Set Pin.
Select “Set Pin” to change the Default pin number
to your own number.
Press OK and enter your new 4 digit pin number
twice and if identical the message “Pin changed”
will be shown. Note :- Keep the New number safe.
Press Menu or Exit buttons to exit the menu.
Time Setting.
Normally the Time setting will be done in initial
installation. However if you need to change the
Time Zone and do not need to make a New
Installation, Select Time setting and press OK.
Time Zone Setting. Select from “Auto” or “Manual”.
Manual allows you to set the Time Zone.
Select “Manual” and then use the
▼
button to select
“Time Zone”. Use the
►
/
◄
buttons to select the
required Time Zone. Press “Menu” to save and exit
the menu.
Language.
In this menu the user can select the preferred
languages.
Language setting Cont…
Preferred
. This is fixed and cannot be adjusted.
All the other Languages may be adjusted. Use the
▲
/
▼
buttons to select the required setting and the
►
/
◄
buttons to select to required language.
Press “Menu” to Save and Exit the menu. Press
“Exit” to exit the menu without saving.
Installation.
When the STB is initially installed you will see the
First Installation menu.
However If there is a need to change areas or add
new channels you will need to use the Installation
menu.
Automatic channel search.
Select this and press OK. All the “multiplex’s” are
searched and a Channel Table is created. Any
existing channels will be erased. All channels will
be stored with respect to their channel number.
Manual search.
To add one or two new channels you may wish to
manually add these. Select Manual Search and
press OK.
There are two options “Frequency search” and
“Channel search”. If you are not familiar with either
the Frequency or Channel number, select
Automatic Channel search and let the STB add the
new channels.
Network search and Clear Service.
These features are not available at present.
First time Installation.
If there are too many changes to the TV service, it
may be better to perform a complete Installation.
See page 9.
7. Menu System
Summary of Contents for SaorView AVT8010
Page 6: ...5 3 3 5 Remote Control ...