17
33
Media Browser.
The STB can support Memory Media such as USB
Hard drive or Memory stick. This allows you to play
MP3 Music files, Jpeg pictures stored on these
devices. Media with Separate “Logical” drives are
also supported.
Note :- Some USB devices may not be compliant or
supported with this STB.
Note :- If the USB device is not recognised after it is
connected and the STB is turned on. Unplug the
USB device, and the Power plug on the STB. Re
insert the USB plug, re insert the STB power plug
and turn the STB on.
To select Media Player, Press the MENU button,
select “Media Browser” and press OK.
The “USB Drive 1” will be highlighted,
note :- If the
drive is “Partitioned” it will show additional drives.
Press OK and a display similar to the one below will
be displayed.
Playing MP3.
Use the
▲
/
▼
buttons to select the required item.
Play this
. Press OK.
Play this + Loop
. Plays the selected file repeatedly.
Play + Loop
. Plays all the media files, starting with
the selected file repeatedly.
Play + Loop + Shuffle.
Plays the files randomly. If
shuffle mode is enabled, previous/next functions will
also jump the tracks randomly.
Play.
Plays all the media files in the folder starting with
the selected one.
Pause/Resume
. Pause and resume the file playing.
Stop
. Stops the file playing.
Previous/Next
. Selects the next or previous file to
play.
Viewing JPEG (photos).
Jump. Jump to the required file using the numeric
buttons.
OK. Views the selected picture in full screen.
Viewing Jpeg files cont..
Play / Slideshow.
Starts the slide show with all the
files in the folder.
Pause.
Pause the slide show.
Continue
. Continues the slide show.
Previous/Next
. Selects the next or previous file.
Exit.
Back to file list.
Shuffle.
Shows the files randomly. If during a slide
show the button is pressed the next pictures wil be
shown randomly.
Loop.
Slide show continues to play.
Info.
Activates the Operation bar.
OSD Messages.
When no signal is received the message below will be
shown. The reason for this is that the Aerial is
disconnected .
When there are no channels stored in the STB, Timer
menu, Channel Table menus are not accessible.
Trying to enter these menus will result in the message
below.
When there is no menu on the screen, you can switch
between the Favourites Lists using the FAV button. If
the favourite list is empty, the following message is
displayed
7. Menu System
Summary of Contents for SaorView AVT8010
Page 6: ...5 3 3 5 Remote Control ...