30
DISPLAY (pressed three times)
: Removes all
While in time shifting mode, you can use following keys:
HDD/DVD
:
Harddisk title list
FUNCTION
:
Opens Functions menu
SETUP
:
Opens Setup menu
TIMER
:
Opens Timer menu
VIDEO SOURCE
:
Changes video source
P/-
:
Changes the channel
SEARCH(
►►
/
◄◄
) :
Fast forward / backward (In 3 different speeds)
4
:
Jump forward 30 seconds.
3
:
Jump backward by 10 seconds.
NOTE:
If you change the source of video and the video standard is different (NTSC vs. PAL), the Time shifting
buffer will be erased.
NOTE:
During Time shifting, a Timer recording (programmed recording) may come up. But watching a channel in
time shifting and recording another channel can not be done simultaneously. Therefore, a confirmation message
will be shown as whether you want to keep watching the current channel (select No option) or proceed timer
recording (select Yes option). If there is no response, recorder assumes timer recording should be started. The
confirmation message will be shown 3 minutes before the timer recording will be started.
Time shifting is stored in a buffer that contains 60 minutes of recording. After 60 minutes, the buffer will be
progressively overwritten. If you need to keep the video contained in this buffer for future usage, you can Save the
desired part of the buffer.
NOTE:
When the harddisk is full, buffering will not be possible at time shift mode.
NOTE:
During time shifting, pressing
PLAY/PAUSE(
►
/
;
)
key may cause 10 seconds of saved title loss.
3.3.2 Save Operation
While watching a program, press
RECORD/DUB
key on the remote control. Then recorder will start to save
the part you are watching. By pressing
RECORD/DUB
key again, OTR function will be activated and record
length will be increased by 30 minutes up to 3 hours according to the selected record quality. The part that is
being saved will be in red color on the time shifting bar. In order to finish saving operation, press
STOP
key
on the remote control.
NOTE:
While saving operation is in progress, you can not change the channel or source. In order to change
channel or source, you have to stop saving operation manually(by pressing
STOP
key). The segment will be
saved on harddisk.
NOTE:
Only one segment in time shifting buffer can be identified for saving. It is not possible to identify
multiple segments. Once the segment has been saved and registered on title list, then this segment (and its
preceding video part) will be removed from the time shifting buffer when
STOP
key is pressed.
NOTE:
In time shifting mode, maximum record length for one title is 3 hours. Therefore, if you want to save a
program longer than 3 hours, one or more titles will be created. For example, if you are saving a program for
10 hours, four titles will be created; 3 titles with 3 hours and one title for one hour.
NOTE:
During time shifting or saving, pressing
PLAY/PAUSE(
►
/
;
)
key may cause 10 seconds of saved
title loss.
3.3.3 Manual Record
In order to record manually to harddisk you have to switch to monitor mode without timeshift as it is
explained above for optical disc. Please be sure about the destination of record. If it is not set as harddisk,
press
HDD/DVD
key in order to change it. You can change record quality by pressing
RECORD MODE
key.
Then press
RECORD/DUB
key on your remote control or front panel of device. Recording process will start.
To stop the recording process, press
STOP
key. Press
PLAY/PAUSE (
►
/
;
)
key to pause recording and
RECORD/DUB
key to resume.
Every information of recording will be displayed on monitor mode’s information view.
