7
Attaching the frame pad
Lay the safety pad on top of the trampoline, aligning the pad section joints with the joints of the frame and
the eyelets facing up. Insert the elastic toggles through the eyelets so the loop end of the tie faces outwards
and the toggle end is on the inside.
Important:
The frame pad must cover the
entire frame and all springs.
6
Flip the frame pad over and pull the elastic
band around the frame. Insert the toggle into
the loop, then rotate the toggle inwards to
secure it. Repeat with all frame pad elastics.
5
7
Important:
Attaching the fiberglass rods can
require a little force, therefore we
recommend two people to do this.
When the frame pad is securely attached to
the frame, insert the fiberglass rods through the
sleeve on the mash skirt attached to the pad.
Pull each fiberglass rod through its fitting
sleeve and attach the matching ends together
with aluminium junction parts. Finally, push the
final two corresponding rods together into a
circle, ensuring that the mash skirt is evenly
stretched.
8
Secure the frame pad to the trampoline by
placing springs into the “spring loops”. You will
find them on the underside of the frame pad
where each pad section joins the next one.
Remove a single spring under every loop, slip
it through the loop and reattach to the frame.
Repeat with all loops. This will prevent the
front of the pads from lifting up
