9.- Parameter setup
Through the programming menu users can set different parameters to adjust the operation of the controller to the
needs of their installation.
9.1.- Programming Menu
It allows changing the unit's operating parameters.
To access the programming menu, press the
SET
button for 10 seconds, or until the "PRG" appears on the screen.
IMPORTANT:
If the password function has been configured, the system will demand entering the
password programmed in
L5
. If the entered password is not correct, the unit will go back to showing
the temperature.
After 20 seconds with no key being pressed, the equipment will return to the previous level. If you are on level 3,
the changes will not be saved.
Level 2
Parameters
Change
parameters
ESC
ESC
ESC
Level 3
Values
Save changes
Don’t save changes
OK
20 sec.
20 sec.
20 sec.
OK
OK
OK
OK
Change
value
SET
SET
SET
SET
SET
SET
Level 1
Menus
Change
menu
Temperature
Indication
10 sec.
OUT OF
PROGRAMMING
PROGRAMMING
18
1454H502 Ed.03
Summary of Contents for AKO-14545
Page 27: ...1454H502 Ed 03 27...
