ASAHI KASEI
[AKD4633-A]
<KM079407>
2016/10
- 23 -
(1-2)
Path and Various Setting Block
The enabled paths are shown. The FS and PLL bits, etc… can be set up.
[Input_ADC Setting], [Digital Filter Setting], [ALC Setting], [DAC_Output Setting] -- each setting dialog can be
opened.
Figure 14. [Path and Various Setting] Block
[Input_ADC Setting] button
: Opens “Input_ADC” dialog box.
[Digital Filter Setting] button
: Opens “Filter Setting” dialog box.
[ALC Setting] Button
: Opens “ALC Setting” dialog box.
[DAC_Output Setting] button
: Opens “DAC_Output Setting” dialog box.
[Power Down/Up] button
: Using the present path setting, the path for recording is set and ON/OFF of
PMx bit is changed. (
Note 5
)
Note 5. There are some register bits which are set up automatically at Power Up/Down. (Refer to the next page.)
