ASAHI KASEI
[AKD4633-A]
<KM079407>
2016/10
- 15 -
Control Software Manual
Evaluation Board and Control Software Settings
1. Set up the evaluation board as needed, according to the previous terms.
2. Connect the evaluation board and PC with a USB cable.
3. The USB control is recognized as HID (Human Interface Device) on the PC.
4. Double-click the icon “akd4633.exe” to open the control program. (
Note 3
)
When the screen does not display “AKDUSBIF-B” at bottom left, reconnect the PC and the USB cable, and push
the [Port Reset] button.
5. Begin evaluation by following the procedure below.
Figure 7. Window of Control Soft
Note 3. The AK4633 should be reset by the SW2 after the power supplies are applied.
