AKM AKD4114-B, Manual

Page: 9 / 30

[AKD4114-B]
[KM076604] 2009/08 - 9 -
„ Jumper set up.
No. Jumper Name Function
1 D3V/VD
Set-up of Power supply source for 74AC245.
D3V : D3V (default)
VD : VD
2 RXP0
Set-up of RXP0 input circuit.
OPT : Optical (default)
BNC : BNC
4,5,6 RX1-3 Set-up of RX1-3 input circuit.
7,8,9,10 RX4-7
RX4-7 set-up depending serial/parallel mode
RX4-7 : Serial mode (default)
DIF2-0,IPS0 : Parallel mode
11,12
DIR MCLK ,
DIT MCLK
MCKO set-up for PORT5(DIT) and PORT2(DIR)
MCKO1 : MCKO1 of AK4114 (default)
MCKO2 : MCKO2 of AK4114
13 TX0
Set-up of TX0 output circuit.
OPT : Optical
BNC : BNC (default)
18 SDA/CDTO
Set-up of SDA/CDTO pin.
4 wire Serial : CDTO/CM0=“H”. (default)
IIC : SDA
19 TXP1
Set-up of TXP1 input circuit.
OPT : Optical (default)
BNC : BNC