AKM AKD4114-B, Manual

Page: 16 / 30

[AKD4114-B]
[KM076604] 2009/08 - 16 -
[Sequence(File)]
Click [Sequence(File)] button to open sequence setting file dialog box.
Those files saved in the “Sequence setting dialog” can be applied in this dialog.
Figure 10. Window of [ Sequence(File) ]
[Open (left)] : Opening a sequence setting file (*.aks).
[Start] :
Executing the sequence setting.
[Start All] : Executing all sequence settings.
Sequences are executed in descending order.
[Help] : Pop up the help window.
[Save] : Saving sequence setting file assignment. The file name is “*.mas”.
[Open(right)] : Opening a saved sequence setting file assignment “*. mas”.
[Close] : Closing the dialog box and finish the process.
*Operating Suggestions
(1) Those files saved by [Save] button and opened by [Open] button on the right of the dialog
“*.mas” should be stored in the same folder.
(2) When “Stop” is selected in the sequence the process will be paused and a pop-up message will appear. Click “OK”
to continue the process.
Figure 11. Window of [ Sequence Pause ]