AkitikA PR-101NR, Assembly Manual

Page: 55 / 68

Page 55 of 68
You can identify the resistors by color code. I always like to cross-check the
identification by using a Digital Ohm Meter.
All of the resistors can be bent at 0.45” width for easy installation.
Designation Value Color Code Done

R3 24R9 Red, yellow, white, gold, brown
R12 24R9 Red, yellow, white, gold, brown
R6 10K Brown, black, black, red, brown
R2 100K Brown, black, black, orange, brown
R7 100K Brown, black, black, orange, brown
R19 100K Brown, black, black, orange, brown
R38 100K Brown, black, black, orange, brown
R1 2K Red, black, black, brown, brown
R9 2K Red, black, black, brown, brown
R17 2K Red, black, black, brown, brown
R18 2K Red, black, black, brown, brown
R20 2K Red, black, black, brown, brown
R28 2K Red, black, black, brown, brown
R36 2K Red, black, black, brown, brown
R37 2K Red, black, black, brown, brown
R30 499 Yellow, white, white, black, brown
R11 499 Yellow, white, white, black, brown
R53 499 Yellow, white, white, black, brown
R56 499 Yellow, white, white, black, brown
R5 1K5 Brown, green, black, brown, brown
R8 1K5 Brown, green, black, brown, brown
R26 1K5 Brown, green, black, brown, brown
R27 1K5 Brown, green, black, brown, brown
R10 22K Red, red, black, red, brown
R25 22K Red, red, black, red, brown
R4 4K02 Yellow, black, red, brown, brown
R29 4K02 Yellow, black, red, brown, brown
R39 4K02 Yellow, black, red, brown, brown
Install the Diodes and Low Profile Capacitors
Bend leads to 0.45” spacing if you have a lead-bending jig.
Match the banded end of the diode to the banded end of the silk-screen.
Designation Value Description Done

D1 1N4004 400 PIV 1 Amp, 4004