26
B R I E F I N S T R U C T I O N
f o r e x p e r i e n c e d u s e r s
Normal timer
◆
For timer recordings, clock, date, and stations must be set correctly
.
◆
Load a cassette with safety tab in place (page 17) and with sufficient free space for the recording.
Call the video’s "MAIN MENU", choose
"Timer Program".
Decide if you want to record "Once",
"Weekly" or "Daily"...
... and confirm.
If you wish to make changes:
Move to the position you want to change using the
/
button.
Change the setting using the +/- or number buttons.
If all setting are ok, press
or
, till you see
“OK:confirm” in the last line.
Confirm.
Switch your video off.
Type in one after the other:
◆
the programme location number,
◆
the time the broadcast starts,
◆
the time the broadcast ends,
◆
the day of the broadcast, if it is not today.
◆
select LP if you wish to make a very long
recording.
HOW OFTEN DO YOU WANT
TO RECORD THIS PROGRAM?
PR+/-:SELECT
OK:CONFIRM MENU:END
ONCE
WEEKLY(ONCE A WEEK)
DAILY(MON-FRI)
DAILY(MON-SAT)
DAILY(MON-SUN)
PR+/-:SELECT (AV)
0-9 :SETUP (PR)
/
:CORRECT MENU:END
PR
--
START TIME
--:--
END TIME
--:--
START DATE --/--
TAPE SPEED
SP
TIMER PROGRAM (ONCE)
TIMER PROGRAM (ONCE)
PR
01
START TIME
18:10
END TIME
20:30
START DATE 11/07(FRI)
TAPE SPEED
LP
PR+/-:SELECT (AV)
0-9 : SETUP (PR)
/
:CORRECT
OK:CONFIRM MENU:END
27
A P P E N D I X
Before you ask a specialist
Mains supply
the video's display does not light
the video doesn’t work
Recording
doesn’t start
the cassette starts playback
or is ejected
Playback
no picture
poor picture quality
poor still picture
Remote control doesn’t work
General
a cassette won’t load
the cassette won't rewind, fast forward,
play or record mode
timer is recording incorrectly
a loud noise when left in Stop mode
"ERR" occurs in the display
-
The mains lead is not connected to the wall socket.
-
condensation may have formed when moving the video recorder
from a cold to a warm room. Wait until the video (and cassette!)
reach room temperature.
-
Is a cassette loaded?
-
the safety tab may be missing.
Cover the hole with adhesive tape (page 17).
-
Are the TV stations tuned in on the video (page 5)?
-
Is there a recording on the video tape?
-
Use PR. –/+ buttons to adjust tracking if horizontal stripes appear.
-
Is the cassette of poor quality or worn out? Test with another
cassette.
-
If you are not using a RCA cable, have you tuned the location for
video input on the TV properly? pages 5/23
-
Try a different cassette. The video head drum may need cleaning
- ask your dealer.
-
Press (pause) several times. Adjust with the PR +/- buttons until
you get the best picture.
-
are the batteries run down?
-
is the distance between remote control and video more than 7
meters?
-
is there an object blocking the direct line between remote control
and video?
-
is there a cassette already loaded? If so, the video’s display will
indicate it.
-
the cassette is already fully wound back or to the end.
-
is the clock set correctly (page 11).
-
if no play or record function is used for about five minutes when
left in Stop mode, the video switches its motor off to conserve the
mechanism.
-
Your video has detected abnormal conditions. Release this mode
with any button , your video then safely switches to stand-by.
2x
MENU
1
2
3
4
5
6
7
8
9
0
PR
