17
I
N S TA L L AT I O N
4
Connect a coaxial cable
between the ANTENNA
OUT terminal on the
cable box and the B–IN
terminal on the A/B
switch.
5
Connect another cable
between the other OUT
terminal on the splitter
and the A–IN terminal on
the RF (A/B) switch.
6
Connect the last coaxial
cable between the OUT
terminal on the RF (A/B)
switch and the VHF/UHF
terminal on the rear of
the TV.
After you’ve made this connection, set the A/B switch to the “A” position for normal
viewing. Set the A/B switch to the “B” position to view scrambled channels. (When you set
the A/B switch to “B
”,
you will need to tune your TV to the cable box’s output channel,
which is usually channel 3 or 4.)
Summary of Contents for PT5598HD
Page 1: ...Owner s Instructions 55 PROJECTION TELEVISION PT5598HD BP68 00231A 00...
Page 68: ...68 MEMO...
Page 69: ...69 MEMO...