AJA KONA LHI, Installation And Operation Manual

Page: 69 / 86

1
63
KONA LHi Installation and Operation Manual — Easy Setups for Typical Uses
The A/V Devices Window
Audio/Video Settings, A/V Devices Window
The A/V Devices window selects the current playback device for both audio and video. Typically,
you’ll select KONA LHi for both playback devices. The format chosen determines the Primary
format for the KONA LHi board during playback. The Video
Options button is greyed out for
KONA LHi (use the KONA LHi Control Panel for video configuration; the Audio Options button
opens a second dialog where Final Cut gives options for changing bit depth, number of
channels, and the sample rate. Since Final Cut currently only supports 2 channels of audio, AJA
recommends you leave all of these settings as set in the factory defaults.
You may wish to use a different KONA LHi output for final Print-to-tape from Final Cut. You can
select that in this window by clicking the checkbox “Different Output for Edit to Tape/Print to
Video.” This allows you to select via a pull-down menu any KONA LHi video output and audio
output.
The window also allows you to turn on and off device and audio output warnings.