AJA KONA LHI, Installation And Operation Manual

Page: 47 / 86

1
41
KONA LHi Installation and Operation Manual — Using The KONA LHi Control
Video Setup Screen
The KONA LHi’s Analog Black level and QuickTime Video Output Display Filter are configured
here.
KONA LHi Control Panel, Video Setup Tab
Setup Screen Settings
Analog Black Level —choices in the black Level pulldown menu are only available for the two
Composite analog formats. Choices presented are for US or Japan settings:
7.5 IRE (NTSC US)
0 IRE (NTSC Japan)
QuickTime Video Output Display Filter —these controls help manage the comprehensive list
of video outputs and geometries that may be available to applications, particularly Final
Cut Pro's
A/V Devices tab.
By selecting the checkbox next to specified parameters, the video outputs related to
these specified parameters are enabled as possible video outputs for applications. As an
example, if the checkbox next to
25/50 is unchecked, 50Hz video outputs are deselected
and would not be available to the user in the A/V Devices tab of Final Cut Pro. To avoid
confusion when working in a particular editorial environment, users might elect to leave
50Hz unchecked if they work solely in a 60Hz editorial environment.
Note: If a prompt occurs in Final Cut Pro stating that the AJA output device is missing, this
simply may be due to the QuickTime Video Output Display Filter for a given parameter
being unchecked for the format selected in the application. If this occurs, simply make the
appropriate selection in the Control Panel application and re-enter Final Cut Pro where the
selection should now be available.