AJA KONA LHI, Installation And Operation Manual

Page: 45 / 86

1
39
KONA LHi Installation and Operation Manual — Using The KONA LHi Control
HDMI Tab Screen
The KONA LHi’s HDMI input and output are shown and configured at this tab screen. The HDMI
input pane shows if an HDMI input source has been detected and locked on, showing the
format found.
KONA LHi Control Panel, HDMI Tab
HDMI Tab Screen Settings
HDMI Output —one pulldown allows you to select either the primary video format
(framebuffer) or a secondary one (up/down/cross-conversion). Pulldowns are provided for
configuring the video output range, color space and number of embedded audio channels
(2 or 8) for the HDMI output.
A Protocol pulldown allows you to choose either “HDMI” or
“DVI” protocol—use DVI if you’re outputting to a DVI monitor using an HDMI to DVI
adapter.
HDMI Input —while there are two different ranges of colorspace values that SDI can use (RGB
and YCbCr) the HDMI input on the KONA LHi will automatically negotiate between the two.
A pulldown allows you to select the video input RGB range (SMPTE or Full).