manualshive.com logo in svg

AJA Ki Pro Ultra Plus, Installation And Operation Manual

Share
Download
AJA Ki Pro Ultra Plus Installation And Operation Manual Download Page 70

Ki Pro Ultra Plus File Based Recorder/Player v1.0r3 70 www.aja.com

 

Figure 25.  Toggle to Data-LAN Media Transfer Mode

Appropriately encoded QuickTime files may be uploaded to the Ki Pro Ultra Plus 

or downloaded from the Ki Pro Ultra Plus. (For clip encoding requirements, see 

"Appropriately Encoded Clips" on page 70

.)

Figure 26.  Data LAN Screen

During an upload, useful information about the upload is given: the name of 

the file being uploaded, the size of the file being uploaded, a progress bar and 

a Cancel button. Additionally transfer speed information, remaining time to 

transfer and percentage of data transferred are shown.

NOTE:  If an upload is canceled or interrupted for any reason, the transfer may be 

resumed by selecting the clip that was transferring again and re-starting the 

transfer. If you have canceled some uploads, you may regain the space that 

these partial uploads may occupy on them media by choosing the Delete Partial 

Uploads option.

To download a clip, select the Download option. Note that the file will be 

downloaded to the particular web browser’s selected download location.

Appropriately Encoded Clips

Appropriately encoded clips must have the following properties:

•  A supported codec: 

•  Apple ProRes 444
•  Apple ProRes 422 HQ
•  Apple ProRes 422
•  Apple ProRes 422 LT

Summary of Contents for Ki Pro Ultra Plus

























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands