manualshive.com logo in svg

AJA Ki Pro Ultra Plus, Installation And Operation Manual

Share
Download
AJA Ki Pro Ultra Plus Installation And Operation Manual Download Page 63

Ki Pro Ultra Plus File Based Recorder/Player v1.0r3 63 www.aja.com

 

http://192.168.0.2 

NOTE:  Your computer or network must be configured to access this IP address. You may 

need to make changes to your network settings on your host computer to access 

this IP address.

NOTE:  If you change the Static IP address of the Ki Pro Ultra Plus camera, you may need 

to power cycle the Ki Pro Ultra Plus so that the host computer correctly identifies 

the new IP address.

Figure 18.  Static IP Address Configuration

All Ki Pro Ultra Plus web screens have certain areas in common. On the left of each 

screen is a Menu panel listing all the available Ki Pro Ultra Plus screen choices. 

Click any of these items to jump to that screen. On the right side of each screen 

you’ll also find a Connection panel. This area shows the connection status and 

Ki Pro Ultra Plus’s serial number and software version. This latter information is 

useful if you ever have to call AJA Technical Support to discuss a problem or get 

help. 

Summary of Contents for Ki Pro Ultra Plus

























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands