manualshive.com logo in svg

AJA Ki Pro Ultra Plus, Installation And Operation Manual

Share
Download
AJA Ki Pro Ultra Plus Installation And Operation Manual Download Page 28

Ki Pro Ultra Plus File Based Recorder/Player v1.0r3 28 www.aja.com

 

The three Display modes accessed via the STATUS, CONFIG, and MEDIA buttons 

are described below.

Status Display

In the Status menu, the User Control Knob will toggle between the two tabs: 

Status and Alarms. These are Read-Only displays.
The Status page shows the status of recording or playing including:

•  Input type and format
•  Timecode settings for recording (set in Config parameter 8.0)
•  Recording Format and Encoding type
•  Audio Input and number of Channels

The following figure shows the display for the Status menu. Note that the Display 

button has been pressed twice to include the VU meters.

Figure 10.  Status Overlay Display

Config and Media Displays

In the Config and Media menus, the User Control Knob scrolls through various 

adjustable parameters, and pressing the knob activates menu field for scrolling 

through the choices (yellow outline indicates the field is active). When entering 

a menu, the system remembers and returns to the last selected parameter. The 

following figure shows the displays for the Config and Media menus.

Summary of Contents for Ki Pro Ultra Plus

























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands