Ki Pro Ultra Plus File Based Recorder/Player v1.0r3 33 www.aja.com
Bottom Line
Displays:
• Percentage of media capacity available
• Current media Slot number
• Current reel number
• Timecode for the clip being recorded or played
• Current clip name
• If closed captioning is present [CC]
Alarm Status
The Alarm menu displays warnings and alarms. Some alarms will automatically
be shown on the top bar of the display. Others will be indicated by the STATUS
button flashing.
Examples of ALARM displays are shown below.
Figure 14. Warning Examples
Once there is a Ki Pro Ultra Plus alarm active, the STATUS button light will blink
for as long as the alarm is present. This alerts you so you’ll know the reasons for
the alarm condition are still active—you can then check the ALARMS display
by pressing the STATUS button and using the User Control Knob to scroll to the
ALARMS tab.
If you enter the Config or Media menus after an alarm notification, the alarm
display will go away. Pushing any button always returns Ki Pro Ultra Plus to its
pre-alarm state—however, if you are unable to correct the alarm condition after
this initial button push, when you leave these menus, the alarm notification will
reappear on the display.
Ki Pro Ultra Plus features a variety of alarms to help you diagnose the condition of
the unit, possible configuration issues, or possible signal issues.
Warning: Input Format Changed-
This prompt appears if a recording is started
and the signal is lost or changed. If this occurs, Ki Pro Ultra Plus stops the
recording that is in progress (unless the Loss of Video Config menu parameter
is set to continue recording.)
Warning: No Video Input -
May appear if there is no video input to
Ki Pro Ultra Plus. No recording will be performed in this state.
