AJA CION, Operation Manual

Page: 30 / 110

CION v1.1 www.aja.com 29
Playing Back a Recording
For playing back recorded material, CION features dedicated transport buttons.
Figure 15. CION Transport Buttons
Stop Button: The Stop Button serves a dual function. When playing back a clip (Play, Fast Forward, or
Reverse) the first push of the Stop Button acts as a “pause” mode: the playback is paused,
the current point of the clip is displayed, and the Stop Button flashes. A second push of
Stop Button completely stops the playback and CION's outputs return to an “E-to-E”
mode where a live view is presented.
NOTE: To determine at a glance if the Stop Button is in a “pause” mode, note that the stop button will
flash if media playback is paused. The Stop Button is fully illuminated in “stop” mode.
Play Button: Press the Play Button to begin forward playback of the current clip at normal speed.
Fast Forward Playback Button: Press this button to begin fast playback of the current clip at 2x speed. Successive pushes
increase the speed to 4x, 8x and 16x.
NOTE: Pushing the button after 16x speed is reached has no further effect. When fast-forwarding at
any speed, audio is muted.
Reverse Playback Button: Pressing this button when not lit begins playback of the current clip in reverse at 2x
speed. Successive pushes increase the speed to 4x, 8x and 16x.
NOTE: Pushing the button after 16x speed is reached has no further effect. When playing in reverse,
audio is muted for all speeds.
Move from Clip to Clip: Rotate the User Interface Control Knob clockwise or counter clockwise.
NOTE: If you have not already entered playback, turning the User Interface Control Knob will
automatically enter the playback paused state (Stop Button flashing) and navigate you from
clip to clip.
Reverse Playback
Play
Fast Forward Playback
User Interface
Control Knob
Stop
Media Unmount