AJA BRIDGE LIVE Installation And Operation Manual Download Page 88

Page: 88 / 139

BRIDGE LIVE Video I/O and Streaming Appliance v1.12 88 www.aja.com

Logo Insertion

You can insert a logo into the stream. You can configure it in the “Output stream

video configuration options” section by clicking the “Output stream video

configuration options” button.

Figure 134. Logo Insertion Button

Upon clicking it, we are presented with another pop-up window, in which the

user can set up.

Figure 135. Logo Insertion Configuration

First, a logo file in the .png format must be uploaded and selected. After that,

the user can choose to position the logo either in pixels, or set its positions using

percent. If for some reason a logo has to have adjusted scale, it’s possible to do it

using the Logo scaling option.
If you save a pipeline that uses the Logo insertion function and has some logo

uploaded as a preset, it will be saved with the logo file, too.

Muxing

BRIDGE LIVE is capable of muxing multiple streams such as audio inputs, captions

and metadata streams into a single output stream. The list of supported input

data is as follows:

Video

• 3G SDI

Summary of Contents for BRIDGE LIVE












































































































































Search results

Summary of Contents for BRIDGE LIVE

Reviews:

Brands by name

Popular brands

AJA BRIDGE LIVE, Installation And Operation Manual

Search results

Summary of Contents for BRIDGE LIVE

Reviews:

Brands by name

Popular brands