manualshive.com logo in svg

AJA BRIDGE LIVE, Installation And Operation Manual

Share
Download
AJA BRIDGE LIVE Installation And Operation Manual Download Page 102

BRIDGE LIVE Video I/O and Streaming Appliance v1.12 102 www.aja.com

 

Figure 155.  System Information page indicating the version number

Licensing

Licenses that are ordered at the time of purchasing the BRIDGE LIVE unit will be 

pre-installed prior to shipment. 
At a later date, if you want to order an additional license, you will need to get 

the unique Installation ID number, found on the System Information page, and 

contact AJA Support. 
To access the System Information page, select 

System Information

 from the 

Setup menu in the upper right area of Dashboard. The System Information page 

displays. 

Figure 156.  Accessing the System Information page from the Setup menu

From the System Information page, the Installation ID is found a few lines below 

the top of the page. 

Installing a New License Package

Typically, new BRIDGE LIVE License Packages are delivered as a zip file. If zipped, 

please unzip the delivered package. 

Remote Installation

Accessing BRIDGE LIVE through a browser requires that you are using a machine 

that has network connectivity to the BRIDGE LIVE device. 

Steps for Installing a New License

1.  From the BRIDGE LIVE interface, select the Licensing menu in the upper 

right area. 

Summary of Contents for BRIDGE LIVE












































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands